1-866-712-5014

General Purpose Thermocouples----General Purpose Thermocouples

TGU style general purpose thermocouple probes, sometimes referred to as tube and wire thermocouple probes, are available in many standard and custom configurations.  These are economical thermocouple assemblies that usually consist of a soft insulated fiberglass or Teflon wire that is housed in a stainless steel tube.

Although this is a very simplistic thermocouple design, it is very versatile and durable if specified properly. Diameters of .093” to .500” are available in almost any length and can be formed with 45° and 90° bends.  Almost any type of lead wire or thermocouple connector can be used, which allows for a great deal of flexibility in designing for low cost applications.

Typically, this type of sensor assembly is used in foodservice equipment, packaging equipment, medical equipment, laboratory and general industrial applications. Durex Industries designs and manufactures temperature sensors to meet the requirements of commercial and industrial applications.

Contact us for Engineering Assistance.

MORE PRODUCTS IN THIS SECTION

----Cast In Heaters for Plastics Processing.jpg

Thermocouple with Standard Plug

TGU0 style thermocouple with standard plug and crimp adapter. General use thermocouples are designed for economical use in a wide variety of applications up to 800°F. Sheath material is 304 stainless steel. Type J (Iron-Constantan) calibration is standard.

----Hot Melt Adhesive Systems.jpg

Thermocouple with Standard Jack

TGU1 style thermocouple with standard jack and crimp adapter. General use thermocouples are designed for economical use in a wide variety of applications up to 800°F. Sheath material is 304 stainless steel. Type J (Iron-Constantan) calibration is standard.

----Custom Cast in Heaters.jpg

Thermocouple with Standard Leadwire Termination

TGU2 style thermocouple with standard leadwire termination. General use thermocouples are designed for economical use in a wide variety of applications up to 800°F. Sheath material is 304 stainless steel. Type J (Iron-Constantan) calibration is standard.

----Ring Heaters.jpg

Thermocouple with Standard Leadwire at 45° Bend

TGU4 style thermocouple with standard leadwire at 45° bend, style. General use thermocouples are designed for economical use in a wide variety of applications up to 800°F. Sheath material is 304 stainless steel. Type J (Iron-Constantan) calibration is standard.

----Cast Aluminum Heaters.jpg

Thermocouple with Standard Leadwire at 90° Bend

TGU9 style thermocouple with standard leadwire at 90° bend. General use thermocouples are designed for economical use in a wide variety of applications up to 800°F. Sheath material is 304 stainless steel. Type J (Iron-Constantan) calibration is standard.

Products

Case Studies

Request Info