Temperature Transmitters

Temperature TransmittersDurex offers a programmable Universal Temperature Transmitter for mounting in DIN  B Sensor Head connected to any Type Thermocouple, RTD or mV signal with 4-20mA analog 2-wire output.

Temperature Transmitter Technical Characteristics

Transmitter Typical Applications include:

5331D Features

5333D Features

5334B Features

logos

 

Shop Our Online Store for Temperature Transmitters.

Request a quote or contact us for assistance.


Temperature Transmitter Mounting and Installation

  • For DIN form B sensor head mounting
  • NB: As Ex barrier we recommend 5104B, 5114B, or 5116B

Transmitter 5331D

----Temperature-Transmitter-5331D-drawing.jpg

 

Transmitter 5333D

----Temperature-Transmitter-5333D-drawing.jpg

 

Transmitter 5333B

----Temperature-Transmitter-5333B-drawing.jpg

Contact us for Engineering Assistance.

Temperature Transmitter Connections

Transmitter 5331D

Connections:

----Transmitter-5331D-drawing.jpg

 

Transmitter 5333D

Connections:

----Transmitter-5333D-drawing.jpg

 

Transmitter 5334B

Connections:

----Transmitter-5334B-drawing.jpg

Temperature Transmitter Electrical Specifications 5331D

Specifications range: -40°C to +85°C


Common Specifications:
Supply voltage, DC: 7.2 - 30 V
Voltage drop: 7.2 VDC
Isolation voltage, test/operation: 1.5 kVAC / 50 VAC
Communications interface: Loop Link
Signal/noise ratio: Minimum 60 dB
Signal dynamics, input: 20 bit
Signal dynamics, output: 16 bit
Accuracy, the greater of general and basic values:

General Values

Input Type Absolute Accuracy Temperature Coefficient
All ≤ ± 0.05% of span ≤ ± 0.01% of span / °C

 

Basic Values

Input Type Absolute Accuracy Temperature Coefficient
RTD ≤ ± 0.2°C ≤ ± 0.01% °C / °C
Lin. R ≤ ± 0.1 Ω ≤ ± 10 mΩ / °C
Volt ≤ ± 10 μV ≤ ± 1 μV / °C
TC Type:E, J, K, L, N, T, U ≤ ± 1°C ≤ ± 0.05°C / °C
TC Type:B, R, S, W3, W5, L ≤ ± 2°C ≤ ± 0.2°C / °C

EMC immunity influence: < ± 0.5% of span
Extended EMC immunity:
NAMUR NE 21, A criterion, burst: < ± 1% of span
Vibration: IEC 60068-2-6 Test FC
Lloyd's specification no. 1: 4 g / 2-100 Hz
Humidity: < 95% RH (non-cond.)
Dimensions: Ø 44 x 20.2 mm
Protection degree (encl. / terminal): IP68 / IP00


Electrical specifications, input:
Max. offset: 50% of select. max. value

TC Input

Type Min. Temp. Max. Temp. Min. Span Standard
B +400°C +1820°C 100°C IEC584
E -100°C +1000°C 50°C IEC584
J -100°C +1200°C 50°C IEC584
K -180°C +1372°C 50°C IEC584
L -100°C +900°C 50°C DIN 43710
N -180°C +1300°C 50°C IEC584
R -50°C +1760°C 100°C IEC584
S -50°C +1760°C 100°C IEC584
T -200°C +400°C 50°C IEC584
U -200°C +600°C 50°C DIN 43710
W3 0°C +2300°C 100°C ASTM E988-90
W5 0°C +2300°C 100°C ASTM E988-90
LR -200°C +800°C 50°C GOST 3044-84


Cold junction compensation:  < ± 1.0°C

RTD and Linear Resistance Input

RTD Type Min. Value Max. Value Min. Span Standard
Pt100 -200°C +850°C 25°C IEC 60751
Ni100 -60°C +250°C 25°C DIN 43760
Lin. R 0 Ω 5000 Ω 30 Ω ---------------



Cable resistance per wire (max.): 5 Ω
Sensor current: Nom. 0.2 mA


Voltage input:
Measurement range: -12 - 800 mV
Min. span: 5 mV


Current output:
Signal range: 4 - 20 mA
Min. signal range: 16 mA
Updating time: 440 ms
Load resistance: ≤ (Vsupply - 7.2) / 0.023 [Ω]


Sensor error detection:
Programmable: 3.5 - 23 mA

Ex / I.S. approval:
KEMA 06ATEX0062: II 1 G Ex ia IIC
T4 or T6
II 1 D Ex ia D

Max. ambient temp. for T1-T4: 85°C
Max. ambient temp. for T5 and T6: 60°C
ATEX, applicable in zone: 0, 1, 2, 20, 21 or 22
ATEX Installation Drawing No.: 5331QA01
FM, applicable in: IS, Class 1, Div. 1
Group A, B, C, D
Ex ia IIC
IS, Class 1, Zone 0
AEx ia IIC
FM Installation Drawing No.: 5300Q502
CSA, applicable in: IS, Class 1, Div. 1
Group A, B, C, D
Ex ia IIC
IS, Class 1, Zone 0
AEx ia IIC
CSA Installation Drawing No.: 533XQC03


Marine approval:
Det Norske Veriatas, Ships & Offshore. Stand. f. Certific. No. 2.4


GOST R approval:
VNIIM & VNIIFTRI, Cert. no.: www. prelectronics.com

Observed authority requirements: Standard:
EMC 2004/108/EC: EN 61326-1
ATEX 94/9/EC: EN 60079-0, -11, -26
EN61241-0, -11
FM: 3600, 3611, 3610
CSA, CAN / CSA: C22.2 No. 157,
E60079-11, UL 913

Of span = Of the presently selected range

Temperature Transmitter Electrical Specifications 5333D

Specifications range: -40°C to +85°C


Common Specifications:
Supply voltage, DC: 8.0 - 30 V
Internal consumption: 25 mW - 0.8 W
Voltage drop: 8 VDC
Warm-up time: 5 min.
Communications interface: Loop Link
Signal/noise ratio: Minimum 60 dB
Response time (programmable): 0.33 - 60 sec.
Signal dynamics, input: 19 bit
Signal dynamics, output: 16 bit
Calibration temperature: 20 - 28°C

Accuracy, the greater of general and basic values:

General Values

Input Type Absolute Accuracy Temperature Coefficient
All ≤ ± 0.1% of span ≤ ± 0.01% of span / °C

Basic Values

Input Type Absolute Accuracy Temperature Coefficient
RTD ≤ ± 0.3°C ≤ ± 0.01% °C / °C
Lin. R ≤ ± 0.2 Ω ≤ ± 20 mΩ / °C

EMC immunity influence: < ± 0.5% of span
Effect of supply voltage variation: ≤ 0.005% of span / VDC
Vibration: IEC 60068-2-6 Test FC
Lloyd's specification no. 1: 4 g / 2-100 Hz
Maximum wire size: 1 x 1.5 mm² stranded wire
Humidity: < 95% RH (non-cond.)
Dimensions: Ø 44 x 20.2 mm
Protection degree (encl. / terminal): IP68 / IP00
Weight: 50 g
Electrical specifications, input:
Max. offset: 50% of select. max. value

RTD and Linear Resistance Input:


RTD Type Min. Value Max. Value Min. Span Standard
Pt100 -200°C +850°C 25°C IEC 60751
Ni100 -60°C +250°C 25°C DIN 43760
Lin. R 0 Ω 10,000 Ω 30 Ω ---------------

Cable resistance per wire (max.): 10 Ω
Sensor current: > 0.2 mA, < 0.4 mA
Effect of sensor cable resistance (3-wire): < 0.002 Ω / Ω
Sensor error detection: Yes

Output:
Current output:
Signal range: 4 - 20 mA
Min. signal range: 16 mA
Updating time: 135 ms
Load resistance: ≤ (Vsupply - 8) / 0.023 [Ω]

Sensor error detection:
Programmable:3.5 - 23 mA
Namur NE43 Upscale: 23 mA
Namur NE43 Downscale: 3.5 mA

Ex / I.S. approval:
KEMA 03ATEX1535 X: ----EXII 1 GD, T80-105°C
EEx ia IIC T6 / T4
Max. ambient temp. for T1-T4: 85°C
Max. ambient temp. for T5 and T6: 60°C
ATEX, applicable in zone: 0, 1, 2, 20, 21 or 22

Ex / I.S. data:
Signal output / supply, terminal 1-2:
Ui: 30 VDC
Ii: 120 mADC
Pi: 0.84 W
Li: 10 μH
Ci: 1.0 nF
Sensor input, terminal 3, 4 and 6:
Uo: 27 VDC
Io: 7 mA
Po: 45 mW
Lo: 34 mH
Co: 90 nF
FM, applicable in: IS, Class 1, Div. 1
Group A, B, C, D
IS, Class 1, Zone 0
AEx ia IIC
FM Installation Drawing No.: 5300Q502
CSA, applicable in: IS, Class 1, Div. 1
Group A, B, C, D
IS, Class 1, Zone 0
Ex ia IIC
CSA Installation Drawing No.: 533XQC03

Marine approval:
Det Norske Veriatas, Ships & Offshore.. Stand. for Certific. No. 2.4
GOST R approval:
VNIIM & VNIIFTRI, Cert. no.: www. prelectronics.com


Observed authority requirements: Standard:
EMC 2004/108/EC: EN 61326-1
ATEX 94/9/EC: EN 50014, EN 50020
EN 50281-1-1, EN 50284,
EN 61241-0, EN 61241-11
FM: 3600, 3611, 3610
CSA, CAN / CSA:  C22.2 No. 157,
E60079-11, UL 913

Of span = Of the presently selected range

Temperature Transmitter Electrical Specifications 5334B

Specifications range: -40°C to +85°C
Common Specifications:
Supply voltage, DC: 7.2 - 28 V
Internal consumption: 25 mW - 0.8 W
Voltage drop: 7.2 VDC
Isolation voltage, test/operation:1.5 kVAC / 50 VAC
Communications interface: Loop Link 5905A
Signal/noise ratio: Minimum 60 dB
Signal dynamics, input: 18 bit
Signal dynamics, output: 16 bit
Accuracy, the greater of general and basic values:

General Values

Input Type Absolute Accuracy Temperature Coefficient
All ≤ ± 0.05% of span ≤ ± 0.01% of span / °C

 

Basic Values

Input Type Absolute Accuracy Temperature Coefficient
Volt ≤ ± 10 μV ≤ ± 1 μV / °C
TC Type:E, J, K, L, N, T, U ≤ ± 1°C ≤ ± 0.05°C / °C
TC Type:B, R, S, W3, W5 ≤ ± 2°C ≤ ± 0.2°C / °C

EMC immunity influence: < ± 0.5% of span
Extended EMC immunity:
NAMUR NE 21, A criterion, burst: < ± 1% of span
Effect of supply voltage variation: < 0.005% of span / VDC
Vibration: IEC 68-2-6 Test FC
Lloyd’s specification no. 1: 4 g / 2-100 Hz
Humidity: < 95% RH (non-cond.)
Dimensions: Ø 44 x 20.2 mm
Tightness (enclosure / terminal): IP68 / IP00
Electrical specifications, input:
Max. offset: 50% of select. max. value

TC Input

Type Min. Temp. Max. Temp. Min. Span Standard
B +400°C +1820°C 200°C IEC584
E -100°C +1000°C 50°C IEC584
J -100°C +1200°C 50°C IEC584
K -180°C +1372°C 50°C IEC584
L -100°C +900°C 50°C DIN 43710
N -180°C +1300°C 100°C IEC584
R -50°C +1760°C 200°C IEC584
S -50°C +1760°C 200°C IEC584
T -200°C +400°C 50°C IEC584
U -200°C +600°C 75°C DIN 43710
W3 0°C +2300°C 200°C ASTM E988-90
W5 0°C +2300°C 200°C ASTM E988-90


Cold junction compensation: < ± 1.0°C

Voltage input:
Measurement range: -12 - 150 mV
Min. span: 5 mV
Input resistance:10 M Ω

Current output:
Signal range: 4 - 20 mA
Min. signal range: 16 mA
Updating time: 440 ms
Load resistance: ≤ (Vsupply - 7.2) / 0.023 [Ω]

Sensor error detection:
Programmable: 3.5 - 23 mA
NAMUR NE43 Upscale: 23 mA
NAMUR NE43 Downscale: 3.5 mA

Ex data:

Ui: 28 VDC
Ii: 120 mADC
Pi: 0.84 W
Li: 10 μH
Ci: 1.0 nF

EEx / I.S. approval:
KEMA 03 ATEX 1536: ----EXII 1 G D
EEx is IIC T1-T6
Max. ambient temp. for T1-T4: 85°C
Max. ambient temp. for T5 and T6: 60°C
Applicable in zone: 0, 1, 2, 20, 21 or 22
Observed authority requirements:               Standard:
EMC 89/336/EEC,  Emission: EN 50 081-1, EN 50 0812-2
Immunity: EN 50 082-2, EN 50 082-1
Emission and Immunity: EN 61 326
ATEX 94/9/EC: EN 50 014, EN 50 0020,
EN 50 281-1-1 and EN 50 284

Of span = Of the presently selected range

Contact us for Engineering Assistance.

Request Info