• Terminal-Head-Resistance-Temperature-Detectors

RTD probe with Terminal Head

0.00
Contact Us Request a Quote

R4 style resistance temperature detector probe with terminal head offers screw cover terminal head and NPT fitting. This RTD temperature sensor assembly is used where protection for the termination is a consideration and can be designed for an outdoor application or with an integral transmitter.
 

Numerous element types, wiring configurations, sheath diameters, terminal heads and fitting options are available. 500°F(260°C), 900°F(482°C) or 1200°F(648°C) temperature options.

R4L-R4M-R4P

 

Part Number Configuration - Example:  R4L-EA-4C060-62AR

RTD StyleElement TypeWiring ConfigurationSheath MaterialSheath Diameter"L" Sheath LengthProcess ConnectionsSpring Loading OptionsTerminal HeadFitting Option

RTD probe with Terminal Head Specs & Options

Back to Top

RTD Style

Resistance Temperature Detector Style Maximum Temperature
R4L 500°F (260°C)
R4M 900°F (482°C)
R4P 1200°F (648°C)
 

Element Types

Element Type Code Element Type Description
A 100 ohm .00385 Curve Class B Platinum
B 100 ohm .00385 Curve Class A Platinum
D 500 ohm .00385 Curve Class B Platinum
E 1000 ohm .00385 Curve Class B Platinum
G 100 ohm .00392 Curve Class B Platinum
 

Wiring Configurations

Wiring Configuration Code Wiring Configuration Descriptions
A Single, 2 Wire
B Single, 3 Wire (Minimum sheath diameter .156”)
C Single, 4 Wire (Minimum sheath diameter .188”)
D Dual, 4 Wire (Minimum sheath diameter .188”)
E Dual, 6 Wire (Minimum sheath diameter .250”)
 

Sheath Material

Sheath Material Code Sheath Material Description
4 304 Stainless Steel
6 316 Stainless Steel
8 Inconel 600
 

Sheath Diameters

Sheath Diameter Code Sheath Diameter Description
B .125” or 1/8” O.D.
V .156” or 5/32” O.D.
C .188” or 3/16” O.D.
D .250” or 1/4” O.D.
F .375” or 3/8” O.D.
 

Dimensional Chart

"L" Dimensions "B" Dimensions "A" Dimensions Fractional Dimension
Letter Code
“L” dimensions are specified in whole inches and a single alpha character which represents a fraction. Enter the three digit code as follows: “B” dimensions are specified in fractions from ⅛” to 1”. Use the single alpha character to indicate the tip length. Enter the code as follows: “A” dimensions are
specified in whole inches only. Enter the three digit code as follows:
1/16" A 11/16" L
1/8" B 3/4" M
3/16" C 13/16" N
1/4" D 7/8" P
5/16" E 15/16" R
3" 030 10 5/8" 10K 3/8" F 1" S
4 1/2" 04H 12" 120 1/8" B 5/8" K 9" 009 7/16" G 0 No
6 1/4" 06D 15 3/8" 15F 1/4" D 3/4" M 12" 012 1/2" H  
7 7/8" 07P 17 3/4" 17M 3/8" F 7/8" P 36" 036 9/16" J
9 5/8" 09K 22 1/8" 22B 1/2" H 1" S 144" 144 5/8" K
 

Terminal Head Process Connections

Process Connection Code Process Connection Description
6 1/2” NPT Stainless Steel Hex Nipple
8 3/4” NPT Stainless Steel Hex Nipple
 

Spring Loaded Options

Spring Loaded Codes Spring Loaded Descriptions
1 Fixed Fitting
2 Spring Loaded Fitting
 

Terminal Head Options

Terminal Head Code Terminal Head Description
A 1/2” NPT Conduit, Aluminum Head
B 3/4” NPT Conduit, Aluminum Head
C 1/2” NPT Conduit, Cast Iron Head
D 3/4” NPT Conduit, Cast Iron Head
M 1/4” NPT Conduit Connection, Miniature Plastic Head
P 1/2” NPT Conduit, Grey Delrin Head
R 3/4” NPT Conduit, Grey Delrin Head
W 1/2” NPT Conduit, White Polypropylene Head
V 3/4” NPT Conduit, White Polypropylene Head
Z 1/2” NPT Conduit, Explosion Proof Aluminum Head
Y 3/4” NPT Conduit, Explosion Proof Aluminum Head
 

Terminal Head Fitting Options

Fitting Option Code Fitting Option Description
0 No Fitting
N 1/8” NPT Compression, Brass
P 1/8” NPT Compression, Stainless Steel
R 1/4” NPT Compression, Brass
S 1/4” NPT Compression, Stainless Steel
V 1/2” NPT Compression, Stainless Steel


Custom Options Available - Contact us for Engineering Assistance.